Table of Contents
Advertisement
EXPLANATION OF COMPONENTS
REMARK
•
You can check maintenance items on the maintenance tab
screen by pressing switch F6 on the maintenance time
warning screen shown in the figure or on the standard
screen.
•
The lighting time of maintenance time notice (yellow) has
been initially set to 30 hours, but it can be changed.
To change the setting, ask your Komatsu distributor.
•
For operations on the maintenance tab screen, see "MAIN-
TENANCE SCREEN SETTING".
OVERLOAD CAUTION LAMP
The overload caution lamp warns that the machine is close to
tipping due to the load (an audible warning is also given), if the
warning is given lower the load.
Refer to the lifting capacity chart for safe load.
SEATBELT CAUTION LAMP
The seat belt caution lamp lights up when the seat belt is not
fastened. It goes out when the seat belt is fastened.
For fastening the seat belt, see "METHOD FOR FASTENING
AND UNFASTENING SEAT BELT".
3-30
OPERATION
Advertisement
Table of Contents
