Table of Contents
Advertisement
OPERATION
•
Adjust the mirror so that you can see a person at a height
of 1.2 m and a distance of 1.0 m from the machine.
•
If you cannot adjust the mirror (1) with your hand, loosen the mounting bolt (2).
Adjust mirror (1).
Tightening torque of mounting bolt (2): 6.0 to 7.0 Nm {0.61
to 0.71 kgm}
NOTICE
•
Tighten the right and left bolts of each bracket al-
ternately so that their right and left clearances (R)
and (L) become equal.
•
If the mirror and stay mounting bolts are tightened
excessively, the bracket may be damaged. Be sure
to tighten bolts to the specified torque.
METHOD FOR FASTENING AND UNFASTENING SEAT BELT
•
Before fastening the seat belt, check that there is no problem in the belt mounting bracket or belt. If
it is worn or damaged, replace it.
•
Even if no problem can be seen in the belt, replace the seat belt every 3 years from starting usage
or 5 years after manufacture whichever comes sooner.
•
Be sure to use the seat belt during operation.
•
Do not twist the seat belt when fastening.
REMARK
•
The date of manufacture of the belt is shown on the back of the belt.
•
The date indicated on the seat belt is the manufactured date. It is the start of the 5-year period. It is not the
start of the 3-year period of actual usage.
•
This seat belt has a retractable device, so it is not necessary to adjust the length.
MACHINE OPERATIONS AND CONTROLS
k
k
WARNING
3-169
Advertisement
Table of Contents
