Table of Contents
Advertisement
OPERATION
METHOD FOR INSTALLING HEADREST
1.
Insert the headrest into the hole at the seat back.
When installing, turn the notch of the shaft toward the front
of the machine.
2.
Push down the headrest.
NOTICE
When installing the headrest, operate it so that the
shaft of the headrest becomes straight. If it is forcibly
twisted, the installation part may be broken.
METHOD FOR ADJUSTING MIRRORS
Be sure to adjust the mirrors before starting work. If they are not adjusted properly, you cannot secure
the visibility and may be injured or may lead to a serious personal injury or death.
To prevent the machine from moving during the work, make sure that the following conditions are met
before starting the work.
•
The machine is placed on a firm, level ground.
•
The work equipment is lowered to the ground in secure posture.
•
The lock lever is in LOCK position.
•
The engine is stopped.
Mirror (A): Machine L.H. front mirror
Mirror (B): Machine R.H. front mirror
Mirror (C): Machine R.H. side mirror
PROCEDURE FOR ADJUSTING MACHINE LEFT FRONT MIRROR (A)
To prevent the machine from moving during the work, make sure that the following conditions are met
before starting the work.
•
The machine is placed on a firm, level ground.
•
The work equipment is lowered to the ground in secure posture.
•
The lock lever is in LOCK position.
•
The engine is stopped.
Adjust the mirror so that the operator can see a person at the rear left of the machine.
MACHINE OPERATIONS AND CONTROLS
k
k
WARNING
k
k
CAUTION
k
k
CAUTION
3-161
Advertisement
Table of Contents
