TRANSPORTATION
2.
Place the connector for wiring (B) in a clean vinyl bag or
the like to protect it from water, etc. during transportation
and fix it to the operator's cab with sealing tape or the like.
3.
Tilt down lock (D) of revolving lamp bracket (C).
4.
Remove the hook of lock (D) from the claw of base bracket
(E).
5.
Hold grip (G) and turn it clockwise, seeing it from the rear
of the machine.
6.
Remove revolving lamp bracket (C) from the claw of base
bracket (E).
When removing and installing the revolving lamp, be
sure to hold grip (G) instead of lamp itself to prevent
damage.
3-256
k
k
CAUTION
OPERATION