OPERATION
1.
Remove bolts (1), and remove handrail (A) and cover (2).
2.
Remove bolts (3), and remove handrail (B).
METHOD FOR INSTALLING HANDRAIL
Install handrail (B) first, then install (A).
1.
Install handrail (B) and cover (4), then tighten them with bolts (3).
2.
Install handrail (A) and cover (2), then tighten them with bolts (1).
Tightening torque: 98 to 123 Nm {10.0 to 12.5 kgm}
METHOD FOR REMOVING AND INSTALLING REVOLVING WARNING LAMP
METHOD FOR REMOVING AND INSTALLING CAB PARTS
METHOD FOR REMOVING CAB PARTS
NOTICE
If the door is opened completely while door stoppers are removed, there is a danger that the door may
be damaged by hitting the cab.
Do not open the door completely while the door stopper is removed.
1.
Removal of stoppers
TRANSPORTATION
3-251