Table of Contents
Advertisement
OPERATION
Changing the flow rate of "Breaker/Attachment Setting"
1.
Select an attachment setting to change its oil flow rate on
the "Attachment Setting" screen, then press the switch F2.
•
When working mode is set to B mode
Change the flow rate by referring to "Changing the
flow rate of "Breaker Setting"".
•
When working mode is set to ATT/P mode or ATT/E
mode
Change the flow rate by referring to "Changing the
flow rate of "Attachment Setting"".
AUTO IDLE STOP TIMER SETTING
The auto idle stop function stops the engine automatically when the engine is operated continuously at idle with
the lock lever in LOCK position for a set time.
The auto idle stop function operates only when the following conditions are satisfied.
•
The engine is running normally.
•
The lock lever is in LOCK position.
•
The engine coolant and hydraulic oil are not overheating.
•
The engine is not in warm-up operation.
•
The machine is not in L mode.
You can set the time to operate the auto idle stop function on the auto idle stop timer setting screen.
1.
Select "Auto Idle Stop Timer Setting" (4) on the "Machine
Setting menu" (b) screen, and then press switch F6.
2.
Select the set time on the "Auto Idle Stop Timer Setting"
screen shown in the figure, and then press switch F6.
On the "Auto Idle Stop Timer Setting" screen shown in the
figure, you can perform the following operations with
switches F3 to F6.
F3: Moves to the next item (1 line below). When on the last
line, it moves to the first line.
F4: Moves to the previous item (1 line above). When on
the first line, it moves to the last line.
F5: Cancels the selection and returns the screen to the
"Machine Setting" menu screen.
F6: Allocates the selected setting to that of the Auto Idle Stop Timer Setting.
REMARK
•
Choosing "OFF" disables operation of the auto idle stop function.
•
You cannot select a time longer than that specified in the Service Menu.
EXPLANATION OF COMPONENTS
3-73
Advertisement
Table of Contents
