Table of Contents
Advertisement
MACHINE OPERATIONS AND CONTROLS
•
If you press the suspension switch, the suspension be-
comes hard.
•
If you pull the suspension switch, the suspension becomes
soft. (Air release sound is heard.)
Weight adjustment range: 60 to 150 kg
METHOD FOR HEATING SEAT
Heated seat (if equipped)
k
k
•
Do not use it in the following cases to prevent low
temperature burn or excessive cooling.
•
When a person's ability to perceive the tempera-
ture is decreased
•
When a person's ability to feel pain is decreased
•
When a person has a delicate skin
•
Do not put a heavy object on the seat cushion. Do not
stick the seat cushion with needles or nails.
•
When you use it, do not put objects which retain heat
such as blankets or floor cushions on the seat. The
seat heater will overheat and it can cause burn injury
or failure.
•
Do not use it while the seat is wet. If water or beverage
is spilled, immediately wipe it off with a dry cloth and
dry it well. Do not use the seat heater to dry the seat.
Turn the seat heater switch ON.
(a): OFF position
(b): ON position
The seat cushion and backrest become warm.
METHOD FOR REMOVING AND INSTALLING HEADREST
METHOD FOR REMOVING HEADREST
When the headrest is not necessary, remove it according to the following procedure.
1.
Pull up the headrest 80 mm or more.
2.
The headrest is pulled out.
NOTICE
When removing the headrest, operate it so that the
shaft of the headrest becomes straight. If it is forcibly
twisted, the installation part may be broken.
3-160
CAUTION
OPERATION
Advertisement
Table of Contents
