Table of Contents
Advertisement
OPERATION
WHEN OPERATOR IDENTIFICATION FUNCTION IS AVAILABLE WITH SKIP
When the starting switch is ON and ID is inputted, the identified
ID is displayed in the column of "Operator ID" on the "Monitor
Setting" menu screen.
When the starting switch is ON and "SKIP" is selected, "****" is
displayed in the column of "Operator ID" on the "Monitor Set-
ting" menu screen.
1.
Select "Operator ID" (5) on the "Monitor Setting" menu
screen, then press switch F6 for 1 second.
2.
The "Operator ID Change" screen is displayed.
•
Input the already registered ID on the "Operator ID
Change" screen and press F6. Then, the identified ID
can be changed.
A message is displayed below and the screen returns
to the "Monitor Setting" menu screen.
On the "Monitor Setting" menu screen, the inputted ID
is displayed in the column of "Operator ID".
EXPLANATION OF COMPONENTS
3-83
Advertisement
Table of Contents
