Table of Contents
Advertisement
OPERATION
How to use working mode selector switch
1.
When working mode selector switch (2) is pressed, the
Working Mode selector screen is displayed on the monitor.
2.
Press function switches F3 or F4 at the bottom of the screen or working mode selector switch (2) to change
the mode selection one at a time.
If no switch is touched for more than 5 seconds, the selected working mode is automatically set as the
working mode and the screen changes to the one for steps 3 and 4.
REMARK
To return to the standard screen without changing the
working mode, press function switch F5.
3.
After selecting the desired mode, press function switch F6
and the mode is displayed in the center of the monitor dis-
play.
(Example: When the power mode is selected: P)
4.
After 2 seconds, the working mode display at the top right
of the screen is highlighted in yellow.
5.
After 2 seconds, the screen returns to the standard screen.
The working mode display highlighted in yellow in step 4
returns to blue.
EXPLANATION OF COMPONENTS
3-45
Advertisement
Table of Contents
