Table of Contents
Advertisement
OPERATION
•
Input the already registered ID on the "Operator ID
Change" screen and press F6. Then, the identified ID
can be changed.
A message is displayed below and the screen returns
to the "Monitor Setting" menu screen.
•
When you press switch F6 after inputting the ID which
is not registered to the "Operator ID Change" screen,
a message is displayed below and the screen returns
to the "Monitor Setting" menu screen.
In this case, the identified ID is not changed.
•
On the "Operator ID Change" screen, if no switch is
operated for more than 30 seconds, the screen auto-
matically changes to the "Monitor Setting" menu
screen.
In this case, the identified ID is not changed.
KEY-ON CAMERA POSITION
On "Key-on Camera Position" menu, you can select the cam-
era image which will be displayed on the right side on the
screen when starting up the machine monitor.
•
You can select one of four camera images from rear cam-
era, rear right camera, front right camera, and rear left
camera.
•
Previous camera image which was displayed at the last
key-off is displayed when "Camera at Previous Key-off" is
selected.
1.
Select "Key-on Camera Position"(1) on "Monitor Setting"
menu screen, then press the switch F6.
2.
Select one camera position to be displayed on the right
side on the machine monitor, and press the switch F6,
then the camera position o be displayed at key-on is set.
The following operations are available with switches F3,
F4, F5, and F6 on "Key-on Camera Position" screen.
F3: Moves to the item below.
F4: Moves to the item above.
F5: Cancels the change and returns the screen to "Monitor
Setting" menu screen.
EXPLANATION OF COMPONENTS
3-85
Advertisement
Table of Contents
