Table of Contents
Advertisement
OPERATION
13. Drive the machine slowly in reverse to load it onto the trail-
er.
When the machine travels over the rear wheels of the trail-
er, it becomes unstable. Drive the machine carefully and
slowly. (Never operate the steering.)
When the machine passes over the rear wheels, it inclines
backward. Carefully travel in reverse to the specified point,
and then stop.
METHOD FOR SECURING MACHINE
NOTICE
•
Stow the radio antenna. Retract the mirrors so that they are within the width of the machine.
For stowing radio antenna, see "STOW ANTENNA". For stowing mirror, see "PROCEDURE FOR AD-
JUSTING MACHINE LEFT FRONT MIRROR (A)".
•
To prevent damage to the bucket cylinder during transportation, put a wooden block under the tip of
the bucket link to prevent the bucket cylinder from touching the floor.
•
Check that the engine hood catcher is locked. Hold the handle of the engine hood and raise it slight-
ly. If it does not open, the catcher is locked.
If the engine hood catcher is not locked, there is a danger that the engine hood may open during
transportation.
After loading the machine onto a trailer, secure the machine as follows.
1.
Extend the bucket and arm cylinders fully, then lower the
boom slowly.
TRANSPORTATION
3-247
Advertisement
Table of Contents
