Features - Omron V720S Series Operation Manual

Electromagnetic inductive rfid system reader/writer
Table of Contents

Advertisement

Features

1-1
Features
Highly Functional
RFID System
Support of off-line
EAS mode
I/O function
Waterproof construction
1-2
The V720S-series Electromagnetic Inductive RFID System is ideal for the
construction of highly functional, long-distance wireless ID systems for
material control and logistics.
V720-BC5D4
RE A DER / WRITER
24VDC
I/O
+24V
GND
GR
V720S-BC5D4
communicate with Tag (manufactured by OMRON) of the V720 and V720S
Series that use two kinds of I-CODE chips manufactured by Philips
Semiconductor (Product name: SL1 ICS30 01, Common name: I.CODE1; and
Product name: SL2 ICS20, Common name: I.CODE2). The chip SL2 ICS 20 is
fully conforming to ISO/EC15693.
The Reader/Writer can be connected to personal computers (PCs) and
Programmable Logic Controllers (PLCs) to process large amounts of data
flexibly with simple commands.
In addition to 1-to-1 communication between a Tag and an antenna, the RFID
System operates in either multiple simultaneous access mode, selective
access mode, or FIFO (first-in, first-out) read/write mode. In multiple
simultaneous access mode, if there is more than one Tag in the
communications area, the RFID System reads and writes data from and to all
the Tags at one time. In selective access mode, the user can specify the Tags
from and to which data is read and written. In FIFO read/write mode, the RFID
System reads and writes data to one Tag after another as they come into the
communications area.
The Reader/Writer can operate in EAS mode (see 3-7 in Section 3) as a
standalone device, with no need to connect with the host.
By issuing commands from the host, the user can operate three input points
and four output points.
The waterproof construction IP65 has been achieved in the Reader/Writer.
RX ANT
TX/RX ANT
OMRON Corporation
MADE IN JAPAN
RUN
IN1
OUT1
COMM
IN2
OUT2
NORM
IN3
OUT3
ERROR
OUT4
COM1
COM2
COM2
EIA-485
R eset
IN1
IN2
COM1
IN3
EIA-232/485
INCOM
OUT1
OUT2
OUT3
OU T4
Host
PC for setup, etc.
OUT COM
(hereinafter
called
Smart Label Technology
This label was manufactured by
     
using Philips Semiconductor's I
・ CODE chips
Lot No.
Tag
Slave
V720-BC5D1
RE A DER / WRITER
RUN
COMM
NORM
ERROR
24VDC
I/O
COM1
COM2
EIA-232
"reader/writer")
is
the
Section 1-1
RX ANT
TX/RX ANT
OMRON Corporation
MADE IN JAPAN
IN1
OUT1
IN2
OUT2
IN3
OUT3
OUT4
COM2
device
to

Advertisement

Table of Contents
loading

This manual is also suitable for:

V720s-bc5d4

Table of Contents