Write (Wt) Of Family Code And Application Id (For Tag) Tag: I.code1 Mode Only; I.code1 Mode Only; Write (Wt) Of Family Code And Application Id (For Tag) Tag - Omron V720S Series Operation Manual

System Command

5-4-6 Write (WT) of Family Code and Application ID (for Tag) Tag:

I.CODE1 Mode Only

This command is used to write Family Codes and application IDs to Tags incorporating I.CODE1
chip.
There is no need to perform the verify read process, since this command performs it as part of its
execution.
<Command Format>
STX Node No..
1 2
Communications
method
Data type
Tag No. setting
Write data
<Response Format>
(1) Single and FIFO access
STX Node No..
1 2
(2) Multiple access (Excluding Communications End Response)
STX Node No..
1 2
(3) Selective access
STX Node No..
1 2
Response code
5-26
Command code
Communi- Data
"WT" cations
method
2 2
Specifies communications method
ST: Single Trigger
SA: Single Auto
SR: Single Repeat
FT: FIFO Trigger
FR: FIFO Repeat
Specifies whether the write data is represented in ASCII or HEX.
A : ASCII code
H : HEX code
For details, refer to 5-9 Data Type.
When using a Single Access, FIFO Accesses, or Selective Access (write)
command, the Tag No. setting should be "0."
When using a multiple command, the Tag No. setting must be appropriate
to the number of Tags that will communicate at one time.
Refer to 5-10 Tag No. Setting for details.
Specification range: 1 to 7
Indicates data to be written to the Tag. The number of characters of the
data is as fellows.
ASCII code: 4
HEX code: 8
Retry Response
Command code
flag code
"WT"
"00"
1 2
Response
Retry
Command code
flag code
"WT"
"00"
1 2
Response
Retry Command code
flag code
"WT"
"00"
1 2
00:normal completion
For other response codes, refer to 5-2-4 Response code List.
Note This command is for I.CODE1 Mode Only. The command is not available in
ISO mode.
Tag No.
Fixed
type setting "FF"
1 1 2
ETX BCC
2 1 1
No. of ETX BCC
write
pages
2 2 1 1
Temporary ETX BCC
No.
2 2 1
Write data
Fixed
"01"
Fam- Appli-
ily cation
Code ID
2 4(ASCII),8(HEX)
MT: Multi-trigger
MR: Multi-repeat
: Selective Access (write)
(For , the values from 00h to
7Fh are available.)
For details, refer to 5-8 Communica-
tions Methods
1
Section 5-4
ETX BCC
1 1