I.code2 Chip (Philips Semiconductor Ic; Sl2 Ics20) - Omron V720S Series Operation Manual

Memory Map of Tag

2-4-2 I.CODE2 Chip (Philips Semiconductor IC; SL2 ICS20)

1. Maximum address space of ISO/IEC15693 chip organized with 4 bytes/page
Page
0h
1h
2h
3h
4h
5h
6h
7h
8h
9h
Ah
Fh
0h
1h
Bh
F
0h
1h
Fh
Caution
This section describes a Tag incorporating a Philips Semiconductor IC chip
SL2 ICS20 Label IC (hereinafter called "I.CODE2"), which is accessed by the
system.
This chip is in conformity with international standards or ISO/IEC15693.
This Reader/Writer is organized with one page (4 bytes) as the minimum
access unit of its memory block, and can be accessed up to the maximum
address space defined in ISO/IEC15693.
Memory Map of an IC (hereinafter called "ISO/IEC chip") in accordance with
ISO/IEC15693.
The user memory area of I.CODE2 chip consists of 28 pages (00h through
1Bh page) or 112 bytes.
Block Byte0 Byte1
0
1
2
15
16
17
27
31
240
241
255
• The memory map above indicates the memory area defined in
ISO/IEC15693, which can be accessed by this product.
• This product incorporates firmware which can access to a 4-bytes/page
chip in accordance with ISO/IEC15693, however, the operating verification
is performed for the Tag incorporating Philips Semiconductor IC;
SL21CS20 (commonly called as I-CODE2). For other manufacturers' tags
and/or Omron's tags incorporating other chips with accordance with
ISO/IEC15693, you are recommended to verify the test of those products
thoroughly.
Byte2 Byte3
Section 2-4
1) shows an example of a
User
memory area of
I･CODE2
Page 00h through 1Bh
Byte)
(28 page = 112
2-13