Repeat Mode - Omron V720S Series Operation Manual

Other Commands

5-8-2-3 Repeat Mode

The Reader/Writer waits for a Tag to enter the R/W Antenna's communications area. Every time an
Tag enters the communications area, the Reader/Writer communicates with the Tag and returns a
response. It is not until communications are stopped by the Stop or Reset command that the
Reader/Writer accepts the next command.
(Host)
Repeat Command
Busy
Busy
Receives a response
Busy
Busy
Receives a response
Busy
5-58
(Reader/Writer)
Waits for a Tag to enter
Waits for a Tag to enter
Communications process
Sends a response
Waits for a Tag to enter
Communications process
Sends a response
Waits for a Tag to enter
Note To send another command from Repeat Mode, be sure to use either the stop
command or reset command, and make sure that the Reader/Writer has fin-
ished processing commands and is in command waiting status before send-
ing the new command.
(Tag)
Yet to enter (1) Waits for a Tag to enter the R/W
Antenna's communications area.
Yet to enter
(2) When a Tag enters the R/W
Antenna's communications area, the
Tag(1)
Reader/Writer communicates with the
Tag.
Passes (3) On completion of communications, it
returns a response.
It waits for another Tag to enter the
R/W Antenna's communications area.
Yet to enter
(4) When another Tag enters the R/W
Tag(2)
Antenna's communications area, it
communicates with the Tag.
Passes
Yet to enter
Section 5-8