Tag Communications Mode (Cm) - Omron V720S Series Operation Manual

Setting Command

5-6-9 Tag Communications Mode (CM)

This command sets and reads the communications mode for use in communications with Tags.
<Command Format>
STX Node No.
1 2
Communica-
tions mode
<Response Format>
STX Node No.
1 2
Response code
Communications
mode
5-44
Command Commni- ETX BCC
code cations
"CM" mode
2 1 1
Specify the number corresponding to the communications mode
that you want to select for communications with Tags.
Specification range: 0, 1, *
When * is specified, the Reader/Writer reads the current setting.
Specification 0
number
Tag communi- Standard
cations mode Mode
Retry Command Response
flag code code:
"CM"
"00"
1 2 2
00: Normal completion
For other response codes, refer to 5-10 Response Code List.
Indicates the number corresponding to the specified terminal resistance.
Note • The setting becomes effective after resetting using the Reset Command.
• In order to make your setting survive system shutdown, you need to save
the Setting Write Command (refer to EW Command in 10, 5-2-4) in the
EEPROM..
1
1
Fast Mode
Com- ETX BCC
muni-
cations
mode
1 1 1
Section 5-6
＊
-