System Write (Sw): Iso Mode Only - Omron V720S Series Operation Manual

System Command

5-4-2 System Write (SW): ISO Mode Only

This command writes the settings of AFI, DSFID, and EAS to a Tag.
<Command Format>
(1) For normal write
STX Node No.. Command code
1 2
(2) When UID of a Tag is specified
STX Node No.. Command code
1 2
Tag type
System method
UID
Data
AFI
DSFID
EAS
setting
<Response Format>
STX Node No..
1 2
Response code
5-22
Tag System
"SW"
type method
2 1 2
Tag System
"SW"
type method
2 1 2
Specifies the Tag type.
A: I.CODE2 chip
Specifies the kind of system information to write to.
01: AFI
02: DSFID
03: EAS (For normal write)
83: Select EAS (When specifying UID of a Tag)
Specifies UID of a Tag in hexadecimal to write to.
Specifies UID of a Tag in hexadecimal to write to.
Specification range: 00 to FFh
Specifies UID of a Tag in hexadecimal to write to.
Specification range: 00 to FFh
00: Enables EAS setting
01: Disables EAS setting
Retry Response code
Command code
"00"
flag "SW"
1 2 2
00:normal completion
For other response codes, refer to 5-2-4 Response code List.
Note This command is in ISO Mode Only. The command is not available for
I.CODE1 mode.
data ETX BCC
2 1 1
ETX BCC
UID data
16 2
ETX BCC
1 1
Section 5-4
1 1