Wan Ip Settings; Figure 12. Wan Ip Settings - ADTRAN 400 Series Basic Configuration Manual

3.9.3

WAN IP Settings

The WAN IP Settings determines how the OLT will obtain the IP address for the ONT.
Device Info
Advanced Setup
Layer2 Interface
WAN Service
LAN
NAT
Security
Parental Control
Quality of Service
Routing
DNS
UPnP
FTP
SIP ALG
CloudAgent
DNS Proxy
Storage Service
Interface Grouping
IP Tunnel
Certificate
Power Management
Multicast
Wireless
DownloadFiles
Diagnostics
Management
Logout

Figure 12. WAN IP Settings

1. Select
2. Select
3. Select
61287RGONT-29C
Revision C
WAN IP Settings
Enter information provided to you by your ISP to configure the WAN IP setting.
Notice: If "Obtain an IP address automatically" is chosen, DHCP will be enabled for PVC in IPoE mode.
If "Use the following Static IP address" is chosen, enter the WAN IP address, subnet mask and interface gateway.
Obtain an IP address automatically
Option 60 Vendor ID:
Option 61 IAID:
Option 61 DUID:
Option 77 User ID:
Option 125:
Use the following Static IP address:
WAN IP Address:
WAN Subnet Mask:
WAN gateway IP Address:
Obtain an IP address automatically
for
Disable Option 125
Next.
This displays the Network Address Translation Settings screen (see
"Network Address Translation Settings"
(8 hexadecimal digits)
(hexadecimal digit)
Disabled Enabled
.
.
on page 38).
Basic Configuration
Back Next
Section 3.9.4,
37