Step 1: Configure The 434Rg Ont; Figure 36. Add Moca Interface Group - ADTRAN 400 Series Basic Configuration Manual

3.13

Step 1: Configure the 434RG ONT

To configure the ADTRAN 434RG ONT do the following:
1. Select the Advanced Setup from the sidebar.
2. Select the
The Interface Grouping screen displays all the Interface Groups that you have previously
configured.
Device Info
Advanced Setup
Wireless
DownloadFiles
Diagnostics
Management
Logout

Figure 36. Add MoCA Interface Group

1. Select Add.
The Interface Grouping Configuration screen is used to configure an interface for MoCA
service.
61287RGONT-29C
Revision C
Interface Grouping
This displays the Interface Grouping screen (see
Interface Grouping -- A maximum 16 entries can be configured
Interface Grouping supports multiple ports to WAN interfaces and bridging groups. Each group will perform as an
Layer2 Interface
independant network. To support this feature, you must create mapping groups with appropriate LAN and WAN interfaces
using Add button. The Remove button will remove the grouping and add the ungroupedinterfaces tot he Default group.
WAN Service
Only the default group has IP interface
LAN
MoCA
NAT
Security
Parental Control
Quality of Service
Routing
DNS
UPnP
FTP
SIP ALG
CloudAgent
DNS Proxy
Storage Service
Interface Grouping
IP Tunnel
Certificate
Power Management
Multicast
This displays the Interface Grouping Configuration screen (see
option on the sidebar.
Group Name Remove WAN Interface
eth0.0
eth1.0
eth1.0
Default
eth2.0
eth3.0
eth3.0
moca0
Default_Video
Add
Remove
Basic Configuration
Figure 36).
LAN Interface DHCP Vendor IDs
AMINO*
ENTONE*
Entone*
udhcp_*(ADB)
minerva*
DPC5003
DC1747TLV3
Figure 37 on page 64).
63