1
Overview
This guide provides the instructions necessary to physically install and configure the ADTRAN
400 Series Residential Gateway (RG) ONTs.
■ Physical installation takes place at the customer premises
■ Configuration takes place at both the customer premises and the Central Office (CO)
1.1
Intended Audience
This guide explains the fields and options in the user interface; it is intended as a reference
while actively engaged with the user interface. Both craft and installation personnel can use
the information contained in this guide.
g
NOTE
ADTRAN also recommends using the
conjunction with the system release you are currently using for your network. These guides
can be found in the
1.2
Document Structure
This guide contains the topics listed in
Table 1. Topic List
Section
1
3
4
g
NOTE
Before performing the procedures in this guide, the following prerequisites are necessary:
■ Qualified technical personnel at both the customer premises and the CO are needed to
■ The ONT must be "discovered" on the PON.
61287RGONT-29C
Revision C
ADTRAN Support Community.
Topic
Overview
Basic Configuration
Warranty and Contact Informa-
tion
perform this configuration.
Total Access 5000 Series FTTP Deployment Guide
Login is required.
Table
1.
Scope
This section describes how to physically install
the ONTs at the customer premises.
This section describes steps to configure ONTs
for basic operation at the Customer Premises
and Central Office.
This section provides the warranty and cus-
tomer support information.
Overview
in
11