Connections; Lan; Wan; Usb 1 & 2 - ADTRAN SR905acv User Manual

LED
Action
SFP

Connections

The SR905ac's exterior ports are shown in the following cabling diagram and explained below.
1

LAN

The four yellow RJ45 Ethernet ports located on the back of the gateway (labeled LAN1, LAN2, LAN3, LAN4) are used to connect
client devices such as computers and printers.

WAN

The red RJ45 port labeled WAN is used to connect the SR905ac gateway to another network device using a RJ45/Ethernet cable.
USB 1 & 2
The two USB ports (2.0 port on the back and 3.0 on the left side) are used to connect USB storage devices to the gateway for
transferring data. They also provide +5 VDC for charging other devices.
PHONE 1 & 2
These grey RJ11 ports can be used to connect your gateway to an Internet provider via a telephone line.
SmartRG Inc., an Adtran company. Proprietary and Confidential. All Rights Reserved. © 2020
Explanation
SFP (fiber optic) connected
Data being transferred
WAN LAN USB PHONE DC/
IN
POWER
2
4
SFP
3
6