Table of Contents

Advertisement

WAN

On this page, you can view information about the connection between your ISP and your gateway. The WAN interface can be DSL or
Ethernet and supports a number of Layer 2 and above configuration options (explained later in this document).
In the left navigation bar, click
The fields on this page are explained in the following table.
Field Name
Description
Interface
The connection interface (Layer 2 interface) through which the gateway handles the
traffic.
Description
The service description such ipoe_0_0_1, showing the type of WAN and its ID.
Type
The service type. Options are PPPoE, IPoE, and Bridge.
VlanMuxId
The VLAN ID. Options are Disabled or 0-4094.
IPv6
The state of IPv6. Options are Enabled and Disabled.
Igmp Pxy
The IGMP proxy.
Igmp Src Enbl
The IGMP source option is enabled for this connection.
MLD Pxy
The MLD proxy.
MLD Src Enbl
The MLD source option is enabled for this connection.
NAT
The state of NAT. Options are Enabled and Disabled.
Firewall
The state of the Firewall. Options are Enabled and Disabled.
Status
The status of the WAN connection(s). Options are Disconnected, Unconfigured, Con-
necting, and Connected.
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2020
Device Info
> WAN. The following page appears.
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Smart/rg sr501

Table of Contents