Configure For 5Ghz Wireless Video Service; Figure 30. Configure 5Ghz Wireless Video Service - ADTRAN 400 Series Basic Configuration Manual

Basic Configuration
3.11.4

Configure for 5GHz Wireless Video Service

The ONT is configurable for 5GHz wireless video service.
1. To change, or configure 5GHz video service, select Wireless>5.0 GHz from the side
g
NOTE
By Default, Video service is Enabled and the SSID is set to ADTRAN_5GHZ_02B4. This is
just an example. The value in your system may be different.
The Wireless 5GHz - Basic screen is used to configure wireless video service for 5GHz.
Device Info
Advanced Setup
Wireless
Diagnostics
Management
Logout

Figure 30. Configure 5GHz Wireless Video Service

2. If the SSID needs to be changed, enter the new SSID and select
3. Return to the Advanced Setup screen and select Interface Grouping. Refer to
56
menu.
This displays the Wireless 5GHz - Basic screen (see
WPS
2.4GHz
5.0GHz
Basic
Security
MAC Filter
Advanced
DownloadFiles
the Video Interface Group"
Wireless 5GHz -- Basic
This page allows you to configure basic features of the wireless LAN interface. You can
enable or disable the wireless LAN interface, set the wireless network name (also known
as SSID), and set the maximum no. of clients.
Click "Apply/Save" to configure the basic wireless options.
Note: Primary SSID is meant to be used for Data service.
Guest SSID is meant to be used for Video service.
Enable Wireless
SSID: ADTRAN_5GHZ_02B4
BSSID: 00:A0:C8:ED:56:81
Max Clients: 96
Wireless - Guest/Virtual Access Points:
Enabled SSID
ADTRAN_5GHZ_VIDEO_02B4
Apply/Save
on page 1-57 for additional instructions.
Figure 30).
Max Clients BSSID
96 06:A0:C8:ED:56:81
.
Apply/Save
61287RGONT-29C
"Configure
Revision C