Configure The Video Interface Group; Figure 31. Remove Video Interface Group - ADTRAN 400 Series Basic Configuration Manual

3.11.5

Configure the Video Interface Group

The Interface Grouping menu is used to select ports for a WAN interface and bridging group. It
displays all the Interface Groups that you have previously configured (sixteen maximum).
To configure a wireless video interface group for 5GHz service, you must do the following:
■ Remove any previously created wireless video interface groups. In the example below, the
■ Add and configure the new wireless video interface group.
Device Info
Advanced Setup
Layer2 Interface
WAN Service
LAN
NAT
Security
Parental Control
Quality of Service
Routing
DNS
UPnP
FTP
SIP ALG
CloudAgent
DNS Proxy
Storage Service
Interface Grouping
IP Tunnel
Certificate
Power Management
Multicast
Wireless
DownloadFiles
Diagnostics
Management
Logout

Figure 31. Remove Video Interface Group

61287RGONT-29C
Revision C
Group Name is video will be removed.
Interface Grouping -- A maximum 16 entries can be configured
Interface Grouping supports multiple ports to WAN interfaces and bridging groups. Each group will perform as an
independant network. To support this feature, you must create mapping groups with appropriate LAN and WAN interfaces
using Add button. The Remove button will remove the grouping and add the ungroupedinterfaces tot he Default group.
Only the default group has IP interface
Group Name
Default
Default_Video
Video
Add
Remove WAN Interface
ppp0.3
veip0.4
wl1_GuestG|wl1.1
veip0.2
veip0.1
Remove
Basic Configuration
LAN Interface DHCP Vendor IDs
eth0.0
wlan0
eth2.0
eth3.0
wlan1
AMINO*
ENTONE*
Entone*
udhcp_*(ADB)
minerva*
DPC5003
DC1747TLV3
eth1.0 DHCP Gp 1
57