Routing Default Gateway; Figure 14. Routing Default Gateway - ADTRAN 400 Series Basic Configuration Manual

3.9.5

Routing Default Gateway

Use the Routing Default Gateway screen to set the default IP gateway that the OLT and ONT
will use to communicate.
Device Info
Advanced Setup
Wireless
DownloadFiles
Diagnostics
Management
Logout

Figure 14. Routing Default Gateway

g
NOTE
The values in the two windows above are for example purposes only. These values are estab-
lished by your Central Office and may be different for your system.
1. For this example,
2. Select
61287RGONT-29C
Revision C
Routing -- Default Gateway
Default gateway interface list can have multiple WAN interfaces served as system default gateways
but only one will be used according to the priority with the first being the highest and the last one
Layer2 Interface
the lowest priority if the WAN interface is connected. Priority order can be changed by removing all
and adding them back in again.
WAN Service
LAN
Selected Default Gateway
NAT
Interfaces
Security
veip0.3
Parental Control
Quality of Service
Routing
Default Gateway
Static Route
Policy Routing
DNS
UPnP
FTP
SIP ALG
CloudAgent
DNS Proxy
Storage Service
Interface Grouping
IP Tunnel
Certificate
Power Management
Multicast
veip0.3
Selected Default Gateway Interface
.
Next
This displays the DNS Server Configuration screen (see
Configuration" on page 40).
Available Routed WAN
Interfaces
veip0.5
veip0.1
->
<-
was moved from the
Available Router WAN Interfaces
block.
Basic Configuration
Back
Next
to the
Section 3.9.6, "DNS Server
39