Table 2. Related Online Documents And Resources - ADTRAN 400 Series Basic Configuration Manual

Table 2. Related Online Documents and Resources

Title
ADTRAN Component-level Documentation
ADTRAN 414 RG 2 POTS/4 GigE
ONT with 2.4 GHz WiFi
ADTRAN 424RG 2 Pots/4GigE and
Dual Band WiFi Job Aid
ADTRAN 424RG 2 Pots/4GigE with
2.4+5.0 Gig WiFi Optical Network
Unit Job Aid
ADTRAN 434RG 2 Pots/4GigE/RF/
MoCA with Dual Band WiFi Job Aid
Total Access System-level Documentation
Total Access 5000 ONT Installation
Precautions Job Aid
Total Access 5000 Series Fiber to the
Premises (FTTP) Deployment Guide
Total Access 5000 Series CLI Dictio-
nary SR 10.3
61287RGONT-29C
Revision C
Part Number Description
61287790F1-22 This document provides a brief over-
view of the 414RG ONT. It can be
used for reference purposes during
and after the ONT has been installed.
61287781F1-22 This document provides a brief over-
view of the 424RG ONT. It can be
used for reference purposes during
and after the ONT has been installed.
61287781F2-22 This document provides a brief over-
view of the 424RG ONT. It can be
used for reference purposes during
and after the ONT has been installed.
61287782F1-22 This document provides a brief over-
view of the 434RG ONT. It can be
used for reference purposes during
and after the ONT has been installed.
6ONTINSTALL-22 This Job Aid provides a list of precau-
tions that should be implemented
during ONT installation to minimize
potential lightning damage to ONTs.
65K95FTTP-50 Provides the minimum configuration
steps needed for the Total Access
5000 Series Fiber to the Premises
(FTTP) deployment, using GPON or
Active Ethernet and Fiber to the Curb.
Use this information to gain a better
understanding of how to configure
elements essential to FTTP applica-
tions.
65K103CLI-35 Provides Command Line Interface
(CLI) commands for the ADTRAN
Total Access 5000 Series products.
This guide gives detailed descrip-
tions of the commands, descriptions
of the syntax, and usage examples
for each supported product. CLI uses
one-line commands for configuring
purposes. Use this information in con-
junction with the deployment guide
when using CLI to deploy the OLT for
your application.
Overview
13