Configure For 2.4Ghz Wireless Data Service; Figure 26. Wireless 2.4Ghz Basic Configuration - ADTRAN 400 Series Basic Configuration Manual

Basic Configuration
3.11.1

Configure for 2.4GHz Wireless Data Service

Follow the steps below to set the ONT for 2.4GHz wireless data service.
1. Select
Device Info
Advanced Setup
Wireless
Diagnostics
Management
Logout

Figure 26. Wireless 2.4GHz Basic Configuration

g
NOTE
By default, 2.4GHz wireless is
For this example,
The Wireless 2.4GHz - Basic screen is used to set the data rate to 2.4GHz. Use this screen to
either change or configure the wireless data service.
2. If the SSID needs to be changed, enter the new SSID and select Apply/Save.
3. To set or change a Password for the SSID, select 2.4GHz then Security from the side
This displays the Wireless 2.4GHz - Security screen (see
52
Wireless>2.4GHz
This displays the Wireless 2.4GHz - Basic screen (see
Wireless 2.4GHz -- Basic
This page allows you to configure basic features of the wireless LAN interface. You can
enable or disable the wireless LAN interface, set the wireless network name (also known as SSID).
Click "Apply/Save" to configure the basic wireless options.
WPS
2.4GHz
Basic
Security
MAC Filter
Advanced
5.0GHz
SSID:
DownloadFiles
BSSID:
Country RegRev:
Max Clients:
Wireless - Guest/Virtual Access Points:
Enabled
Apply/Save
ADTRAN_2.4GHZ_02B4
menu.
from the side menu.
Enable Wireless
Hide Access Point
Client Isolation
Disable WMM Advertise
Enable Wireless Multicast Forwarding (WMF)
ADTRAN_2.4GHZ_02B4
00:A0:C8:ED:56:78
105
96
SSID Hidden
ADTRAN_2.4GHZ_02B4_Guest1
ADTRAN_2.4GHZ_02B4_Guest2
ADTRAN_2.4GHZ_02B4_Guest3
and has a default SSID. The Default SSID is unique.
Enabled
is used. Your values may be different.
Figure 26).
Disable
Isolate Enable Max
WMM BSSID
Clients WMF Clients
Advertise
96 N/A
96 N/A
96 N/A
Figure 27).
61287RGONT-29C
Revision C