Table 9. 414Rg Ont Led Status - ADTRAN 400 Series Basic Configuration Manual

Table 8. 424 RG and 434RG ONT LED Status
Label
WIFI
(2.4, 5.0 GHZ)
(802.11
a/b/g/n/ac
compliant)
PHONE 1-2
RF+MOCA
(434RG Only)
WPS
Once the LEDs have stabilized, contact Central Office personnel. The next steps must be
performed from the Central Office. See
Table 9

Table 9. 414RG ONT LED Status

Label
POWER
FIBER
INTERNET
61287RGONT-29C
Revision C
Status
Off


Green
2 Green Flashing (Fast)
Off


Green
2 Green Flashing (Fast)
Off

 Green
2 Green Flashing (Fast)
Off

Green

RF
Green Flashing
2
2
Yellow Flashing (Fast)
Red

Off

Green

WPS
2 Green Flashing (Fast)
provides the LED status for the 414RG ONT during normal operations.
Status
Off

Green

Off

 Green

Green Flashing (Fast)
2
Off

Green

Indication
Power is Off, or Wireless 2.4 GHz is Disabled
Wireless 2.4 GHz is Enabled
Data is being sent or received on 2.4GHz
Power is Off, or Wireless 5 GHz is Disabled
Wireless 5 GHz is Enabled
Data is being sent or received on 5GHz
Unequipped or on-hook and not ringing
Line is off-hook
Line in ringing state
No RF function
RF-only connection (MoCA down)
MoCA up+RF video connection
MoCA-only connection (no RF)
RF+MoCA down
Power Off or WPS is Disabled
WPS is Enabled
WPS push button pressed and device is ready
to accept connection
Section 3.7, "Central Office Steps"
Indication
AC or battery off
No Failure
No connection to the OLT, open fiber, failure at
the ONT, or power is Off
Signal present and is within operating range
Ranging in Progress
No IP address configured on WAN Interface, or
Power is Off
WAN Interface is configured with IP address
Basic Configuration
on page 29.
27