Configure Security For The 5Ghz Wireless Data Service; Figure 29. 5Ghz Security - ADTRAN 400 Series Basic Configuration Manual

3.11.3

Configure Security for the 5GHz Wireless Data Service

Use the Wireless 5GHz - Security screen to establish a password for the SSID.
Device Info
Advanced Setup
Wireless
DownloadFiles
Diagnostics
Management
Logout

Figure 29. 5GHz Security

1. To set or change the password, choose the appropriate SSID from the
2. In the Network Authentication dropdown window, option select the one designated for
3. If you would like this service protected, enter a password in the
4. Select Apply/Save.
This completes the configuration for wireless 5GHz data service
What's Next!
To configure Wireless Video Service for 5GHz, proceed to
Wireless Video Service"
61287RGONT-29C
Revision C
2.4GHz
5.0GHz
Basic
Security
MAC Filter
Advanced
dropdown window. For this example, ADTRAN_5GHz_02B4 is used.
2.4 GHz service. In this example, WPA2-PSK is used.
window.
on page 56.
Wireless 5GHz -- Security
This page allows you to configure security features of the wireless LAN interface
You may setup configuration manually.
Manual Setup AP
You can setup the network authentication method, selecting data encryption, specify
whether a network a network key is required to authenticate to this wireless network
and specify the encryption strength. Click "Apply/Save" when done.
Select SSID: ADTRAN_5Ghz_02B4
Network Authentication: WPA2-PSK
............
WPA/WAPI passphrase:
Apply/Save
Basic Configuration
Click here to display
Select SSID
WPA/WAPI passphrase
Section 3.11.4, "Configure for 5GHz
55