Interface Grouping Configuration For Video Service; Figure 23. Interface Grouping Configuration - ADTRAN 400 Series Basic Configuration Manual

Basic Configuration
3.10.6

Interface Grouping Configuration for Video Service

Use the Interface Grouping Configuration screen to configure an interface for video service.
Device Info
Advanced Setup
Layer2 Interface
WAN Service
LAN
NAT
Security
Parental Control
Quality of Service
Routing
DNS
UPnP
FTP
SIP ALG
CloudAgent
DNS Proxy
Storage Service
Interface Grouping
IP Tunnel
Certificate
Power Management
Multicast
Wireless
DownloadFiles
Diagnostics
Management
Logout

Figure 23. Interface Grouping Configuration

1. In the
2.
3. The
4. To automatically add clients, enter the DHCP Vendor ID string of the client in the
5. Select Apply/Save.
48
Interface Grouping Configuration
To create a new interface group:
1. Enter the Group name and the group name must be unique and select either 2. (dynamic) or
3. (static) below:
2. If you like to automatically add LAN clients to a WAN Interface in the new group add the
DHCP client request with the specified vendor ID (DHCP option 60) will be denied an IP
address from the local DHCP server.
3. Select interfaces from the available interfaces list and add it to the grouped interfaces list
using the arrow buttons to create the required mapping of the ports. Note that these clients
may obtain public IP addresses.
4. Click Apply/Save button to make the changes effective immediately.
IMPORTANT If the vendor ID is configured for a specific client device, please REBOOT the
device attached to the modem to allow it to obtain an appropriate IP address.
video
Group Name:
WAN Interface used in the grouping
Grouped LAN Interfaces
eth1.0
Automatically Add Clients with the
following DHCP Vendor IDs
DHCP Grp 1
field, enter a user-defined description for the Interface Group. Any
Group Name
description can be used, but because this a a video service, the example used is video.
In the WAN Interface used in the grouping
be used. The drop down window will contain WAN interfaces for your specific system.
The one used is an example only. In this example
to use the WAN Interface that is configured for video service for your system.
Available LAN Interfaces
Select the LAN interface from the
and click on the left arrow. The selected interface is transferred to the
window. For this example, eth1.0 is used.
Interfaces
Automatically Add Clients With the following DHCP Vendor IDs table. For this
example, DHCP Grp 1 is used.
This returns you to the Interface Grouping Screen (see
Interface Grouping screen now displays the interface group (video) that you just added.
ipoe_veip0/veip0.1
Available LAN interfaces
eth2.0
eth3.0
wlan0
wl0_GuestG|wl0.1
wl0_GuestG|wl0.2
->
wl0_GuestG|wl0.3
wlan1
<-
wl0_GuestG|wl1.1
Apply/Save
drop-down window, select the WAN Interface to
, ipoe_veip0/veip0.1
window contains all the LAN interfaces for your system.
Available LAN Interfaces
is used. Remember
list that is designated for video
Grouped LAN
Figure 24 on page 49). The
61287RGONT-29C
Revision C