Table of Contents
Advertisement
Connections
The SR400ac's exterior ports are shown in the following cabling diagram.
LAN
The four yellow RJ45 Ethernet ports located on the back of the gateway (labeled LAN1, LAN2, LAN3, LAN4) are used to connect
client devices such as computers and printers.
WAN
The red RJ45 port labeled WAN is used to connect the SR400ac gateway to another network device using a RJ45/Ethernet cable.
USB
The two USB ports (2.0 port on the back and 3.0 on the left side) are used to connect USB storage devices to the gateway for
transferring data. They also provide +5 VDC for charging other devices.
POWER
Use ONLY the dedicated power supply included with your gateway (3-amp 12 v). Intended for indoor use only.
l
Do NOT open the device. Opening or removing covers can expose dangerous high voltage points or other risks. ONLY qualified
l
service personnel can service the device. Please contact your vendor for further information.
SmartRG Inc., an Adtran company. Proprietary and Confidential. All Rights Reserved. © 2021
7
- Quick Links:
- Logging in to the Sr400Ac Interface
Hide quick links:
Advertisement
Table of Contents
