Overview
1.3
Hazard Symbols
The following Hazard symbols are used throughout this guide:
1.4
Hazard - Hardware
Protective measures are requirements for the protection of people, equipment, and the
environment.
f
WARNING!
Warning indicates a hazard which, if not avoided, could result in death, injury, or serious
property damage.
C
CAUTION!
This symbol combined with the CAUTION! signal word indicates that a Laser product is incor-
porated with the product and provides compliance and safety information governing its use.
f
CAUTION!
Caution indicates a hazard, which if not avoided, could result in service interruption, damage
to the equipment or minor property damage.
g
NOTE
Notes inform the user of additional, but essential, information or features.
t
This symbol indicates a tip.
1.5
Hazard - Software
The following symbols are intended for use where the physical risk to personnel or equipment
is negligible (software related).
f
WARNING!
Warning: Service affecting. Possible risk of system failure.
f
CAUTION!
Caution: Indicates that a failure to take or avoid a specific action could result in a loss of data.
w
NOTICE!
Notice: Provides information that is essential to the completion of a task.
g
NOTE
Note: Information that emphasizes or supplements important points of the main text.
1.6
Related Online Documents and Resources
Refer to
Documentation for ADTRAN Access and Aggregation products is available for viewing and
download directly from the ADTRAN Support Community website.
Go to:
Registration is required.
12
Table 2
for additional online documentation and resources for this product.
https://supportforums.adtran.com/welcome
61287RGONT-29C
Revision C