Manage Cameras For Poe Device; Add Poe Cameras; Add Non-Poe Ip Cameras - HIKVISION NVST HNR Series User Manual

If the IP camera to add has not been actiavated, you can activate it from the IP camera list on the
camera management interface.

Manage Cameras for PoE Device

This chapter is only applicable for the following models: Pro Series Device.
Purpose:
The PoE interfaces enables the device system to pass electrical power safely, along with data, on
Ethernet cabling to the connected PoE cameras. Supported PoE camera number varies with device
model
If you disable the PoE interface, you can also connect to the online network cameras. And the PoE
interface supports the Plug-and-Play function.
Follow the steps to add network cameras for device supporting PoE function.

Add PoE Cameras

Connect PoE cameras to device PoE ports with network cables.
Go to Camera > Camera > IP Camera to view camera image and information.

Add Non-PoE IP Cameras

You can disable the PoE interface by selecting the manual while the current channel can be used as
a normal channel and the parameters can also be edited.
Go to Camera > Camera > IP Camera.
Position the cursor on a window with no linked IP camera and click the
Network Video Recorder User Manual
53
button.