Configure Event Recording/Capturing - HIKVISION NVST HNR Series User Manual

Configure Event Recording/Capturing

Purpose:
The video recorder can record videos or capture pictures when an IoT alarm occurs.
Click of an added IoT device.
Select desired Event Type.
Check Enable.
Check Trigger Channel you want to record event videos or capture pictures when an alarm
occurs.
Click Apply.
Configure event recording or capturing schedule. Choose from:
 Recording
Go to Storage > Schedule > Record.
Select Camera No. and check Enable Schedule. The camera should be the camera you select
in step 4.
Select the recording type as Event.
Drag the mouse on the time bar to set the event detection recording schedule. Refer to 8.4
Configure Recording Schedule for details.
Click OK.
 Capturing
Go to Storage > Schedule > Capture.
Select Camera No. and check Enable Schedule. The camera should be the camera you select
in step 4.
Network Video Recorder User Manual
Trigger Channel
65