Intrusion Detection - HIKVISION NVST HNR Series User Manual

3) Click Stop Drawing.
Set the arming schedule. Refer to Chapter 12.1 Configure Arming Schedule.
Set the linkage actions. Refer to Chapter 12.2 Configure Alarm Linkage Actions.
Click Apply.

Intrusion Detection

Purpose
The Intrusion detection function detects people, vehicles or other objects that enter and loiter in a
pre-defined virtual region. Specific actions can be taken when an alarm is triggered.
Go to System > Event > Smart Event.
Select a camera to configure.
Click Intrusion.
Check Enable Intrusion Detection.
Optionally, check Save VCA Picture to save the captured intrusion detection pictures.
Follow these steps to set the detection rules and detection areas.
Select Virtual Panel. Up to 4 virtual panels are selectable.
Set Time Threshold, Sensitivity, and Percentage.
Network Video Recorder User Manual
Intrusion Detection
156