Fast Moving Detection - HIKVISION NVST HNR Series User Manual

Fast Moving Detection

Purpose
Fast moving detection is used to detect suspicious running and chasing, over speed and fast
moving. It will trigger alarm when an object is moving fast and send notification to arming host so
that necessary actions can be taken in advance.
Go to System > Event > Smart Event.
Select a camera to configure.
Click Fast Moving.
Check Enable Fast Moving.
Optionally, check Save VCA Picture to save the captured fast moving detection pictures.
Set fast moving detection parameters.
Select Arming Area. Up to 4 areas are selectable.
Click Draw Area to draw a quadrilateral in the preview window by specifying four vertices of
the area.
Set Sensitivity.
Sensitivity: Similarity of the background image to the object. The higher the value, the easier
the detection alarm will be triggered.
Set the arming schedule. Refer to Chapter 12.1 Configure Arming Schedule.
Set the linkage actions. Refer to Chapter 12.2 Configure Alarm Linkage Actions.
Network Video Recorder User Manual
Fast Moving Detection
162