Click Apply.
Parking Detection
Purpose
Parking detection is used to detect parking violation in set area, applied in expressway and one-
way street.
Go to System > Event > Smart Event.
Select a camera to configure.
Click Parking.
Check Enable Parking Detection.
Optionally, check Save VCA Picture to save the captured parking detection pictures.
Set parking detection parameters.
Select Arming Area. Up to 4 areas are selectable.
Set Time Threshold (s).
Time Threshold: The time of car staying in the region. If the value is 10, an alarm is triggered
after the car has stayed in the region for 10s. Its range is [5s-20s].
Set Sensitivity.
Network Video Recorder User Manual
Parking Detection
163