Set Double Verification Permission For Non-Admin Users - HIKVISION NVST HNR Series User Manual

Set the permissions.
 Select the camera (s) to allow live view when the current user account is in logout status.
 Deselect the camera (s) to forbidden the camera (s) being viewed when the current user
account is in logout status.
Click OK.
 The admin user can set this permission for user accounts.
 When the normal user (Operator or Guest) has no local live view permission for specific
camera (s) (refer to 18.2.2 Set Local Live View Permission for Non-Admin Users), the live
view permission for such camera (s) on lock screen status cannot be configured (live view
not allowed by default).

Set Double Verification Permission for Non-Admin Users

After double verification is enabled in the channel, a non-admin user must be verified by an
authorized user to get the permission. Only admin has the authorization to set double verification.
Go to Maintenance > System Service > Double Verification Settings.
Check Enable Double Verification.
Network Video Recorder User Manual
Set Live View Permissions on Lock Screen
203