Table of Contents
Advertisement
A PIR (Passive Infrared) alarm is triggered when an intruder moves within the detector vision field.
The heat energy dissipated by a person or any other warm blooded creature such as dogs, cats,
etc., can be detected.
Go to System > Event > Smart Event.
Select a camera to configure.
Click PIR Alarm.
Check PIR Alarm.
Optionally, check Save VCA Picture to save the captured of PIR alarm pictures.
Set the arming schedule. Refer to Chapter 12.1 Configure Arming Schedule.
Set the linkage actions. Refer to Chapter 12.2 Configure Alarm Linkage Actions.
.Click Apply.
Network Video Recorder User Manual
170
FIR Alarm
Advertisement
Table of Contents
