Select a camera to configure.
Click Region Exiting.
Check Enable Region Exiting Detection.
Optionally, check Save VCA Picture to save the captured region exiting detection pictures.
Follow these steps to set the detection rules and detection areas.
Select Arming Area. Up to 4 areas are selectable.
Set Sensitivity.
Sensitivity: The higher the value is, the more easily the detection alarm will be triggered. Its
range is [0-100].
Click Draw Area and draw a quadrilateral in the preview window by specifying four vertices of
the detection area.
Set the arming schedule. Refer to Chapter 12.1 Configure Arming Schedule.
Set the linkage actions. Refer to Chapter 12.2 Configure Alarm Linkage Actions.
Click Apply.
Loitering Detection
Purpose
Network Video Recorder User Manual
Region Exiting Detection
159