Table of Contents
Advertisement
People Gathering Detection
Purpose
People gathering detection is used to detect whether the density of human bodies within a
specified area exceeds the set value and trigger alarm for linked actions.
Go to System > Event > Smart Event.
Select a camera to configure.
Click People Gathering.
Check Enable People Gathering Detection.
Optionally, check Save VCA Picture to save the captured people gathering detection pictures.
Set people gathering detection parameters.
Select Arming Area. Up to 4 areas are selectable.
Click Draw Area to draw a quadrilateral in the preview window by specifying four vertices of
the area.
Set Percentage.
Percentage: The percentage refers to the density of human bodies within the area. If it
exceeds the threshold value, the device will trigger alarm.
Set the arming schedule. Refer to Chapter 12.1 Configure Arming Schedule.
Set the linkage actions. Refer to Chapter 12.2 Configure Alarm Linkage Actions..
Click Apply.
Network Video Recorder User Manual
People Gathering Detection
161
Advertisement
Table of Contents
