HIKVISION NVST HNR Series User Manual page 25

Network Video Recorder User Manual
No. Name
1 POWER ON/OFF
2 IR Receiver
Status
3
Indicators
Front Panel
Table 1-4 Description of Front Panel
Function Description
Power on/off switch.
Receiver for IR remote
ALARM Turns red when a sensor alarm is detected.
Ready LED is normally blue, indicating that the
READY
device is functioning properly.
Turns blue when device is controlled by an IR
remote.
STATUS
Turns red when controlled by a keyboard and
purple when IR remote and keyboard is used at
the same time.
Flashes red when data is being read from or
HDD
written to HDD.
MODEM Reserved for future usage.
Flashes blue when network connection is
TX/RX
functioning properly.
Guard LED turns blue when the device is in
GUARD armed status; at this time, an alarm is enabled
when an event is detected.
24