Configure Pppoe; Configure Ntp - HIKVISION NVST HNR Series User Manual

Configure PPPoE

If the device is connected to the Internet through PPPoE, you need to configure the user name and
password accordingly under System > Network > TCP/IP > PPPoE.
Contact your Internet service provider for details about PPPoE service.

Configure NTP

Purpose
Connection to a network time protocol (NTP) server can be configured on your device to ensure
the system's date and time accuracy.
Go to System > Network > TCP/IP > NTP.
Check Enable.
Configure NTP settings as need.
 Interval (min): Time interval between two time synchronization with NTP server
 NTP Server: IP address of the NTP server
 NTP Port: Port of the NTP server
Click Apply.
Network Video Recorder User Manual
NTP Settings
185