Table of Contents
Advertisement
Configure the Image Parameters
Purpose
You can customize the image parameters including the brightness, contrast, and saturation for the
Live View and recording effect.
Go to Camera>Display > Image Settings.
Select a camera from the drop-down list.
Adjust the slider or click on the up/down arrow to set the value of the brightness, contrast, or
saturation.
Click Apply.
Configure the Day/Night Switch
The camera can be set to day, night, or auto switch mode according to the surrounding
illumination conditions.
Go to Camera>Display > Day/Night Switch.
Select the camera from the drop-down list.
Set the day/night switch mode to Day, Night, Auto, or Auto-Switch.
Auto: The camera automatically switches between day mode and night mode according to the
illumination.
− The sensitivity ranges from 0 to 7, and higher sensitivity more easily triggers the mode
switch.
− The switch time refers to the interval time between the day/night switch. You can set it from
5 sec to 120 sec.
Auto-Switch: The camera switches the day mode and the night mode according to the start
time and end time you set.
Click the Apply.
Configure IP Camera Time Sync
The device can automatically synchronize the time of connected IP camera after enabling this
function.
Go to Camera > Camera > IP Camera.
Position the cursor on the window of the IP camera and click
Check Enable IP Camera Time Sync.
Network Video Recorder User Manual
70
.
Advertisement
Table of Contents
