HIKVISION NVST HNR Series User Manual page 17

Front Panel 2:
No. Name
POWER
1
ON/OFF
2 USB Interface
IR Receiver
3
POWER
READY
STATUS
4
ALARM
HDD
Tx/Rx
Network Video Recorder User Manual
Front Panel
Table 1-2 Description of Front Panel
Function Description
Power on/off switch.
Connect to USB mouse or USB flash memory.
Receiver for IR remote control. devices.
Power indicator lights in green when DVR is powered up.
Ready indicator is normally green, indicating that the DVR is
functioning properly.
Indicator turns green when DVR is controlled by an IR remote
control with the address from 1~254;
Indicator turns red when the SHIFT button is used;
Indicator does not light when the DVR is controlled by a
keyboard or by the IR remote control with the address of 255;
Indicator turns green when the DVR is controlled by IR remote
control (with the address from 1~254) and keyboard at the
same time , and the SHIFT button is not used;
Indicator turns orange : (a) when the DVR is controlled by IR
remote control (with the address from 1~254) and keyboard at
the same time and the SHIFT button is used as well; (b) when
the DVR is controlled by IR remote control (with the address
from 1~254) and the SHIFT button is used.
Alarm indicator turns red when a sensor alarm is detected.
HDD indicator blinks in red when data is being read from or
written to HDD.
TX/RX indictor blinks in green when network connection is
16