Configure the Live View parameters.
Video Output Interface: Select the video output to configure.
Live View Mode: Select the display mode for Live View, e.g., 2*2, 1*5, etc.
Dwell Time: The time in seconds to wait between switching of cameras when using auto-switch
in Live View.
Enable Audio Output: Enable/disable audio output for the selected video output.
Volume: Adjust the Live View volume, playback and two-way audio for the selected output
interface.
Event Output: Select the output to show event video.
Full Screen Monitoring Dwell Time: Set the time in seconds to show alarm event screen.
Click OK.
Configure Live View Layout
Configure Custom Live View Layout
Go to System > Live View > View.
Click Set Custom Layout.
Click
on Custom Layout Configuration.
Edit the layout name.
Select a window division mode.
Network Video Recorder User Manual
Live View-General
76