Configure Snmp - HIKVISION NVST HNR Series User Manual

Configure SNMP

Purpose
You can configure SNMP settings to get device status and parameter information.
Before You Start
Download the SNMP software to receive device information via the SNMP port. By setting the trap
address and port, the device is allowed to send alarm events and exception messages to the
surveillance center.
Go to System > Network > Advanced > SNMP.
Check Enable. A message will pop up to notify about a possible security risk. Click Yes to
continue.
Configure the SNMP settings as needed.
 Trap Address: SNMP host IP address.
 Trap Port: Port of the SNMP host.
Click Apply.
Network Video Recorder User Manual
SNMP Settings
186