Configure Email
Purpose
The system can be configured to send an e-mail notification to all designated users when a
specified event occurs such as when an alarm or motion event is detected, the administrator
password is changed, etc.
Before You Start
The device must be connected to a local area network (LAN) that contains an SMTP mail server.
The network must also be connected to either an intranet or the Internet depending on the
location of the e-mail accounts to which you want to send notifications.
Go to System > Network > Advanced > Email.
Configure the following e-mail settings.
Enable Server Authentication: Check to enable the function if the SMTP server requires user
authentication, and enter the user name and password accordingly.
SMTP Server: IP address of SMTP Server or host name (e.g., smtp.263xmail.com).
SMTP Port: The default TCP/IP port used for SMTP is 25.
Enable SSL/TLS: Check to enable SSL/TLS if required by the SMTP server.
Sender: The sender's name.
Sender's Address: The sender's Address.
Network Video Recorder User Manual
E-mail Settings
187