Table of Contents
Advertisement
Click Apply to activate the settings.
Configure POS Alarm
Purpose
A POS event can trigger channels to start recording, or trigger full screen monitoring or an audio
warning, notifying the surveillance center, send e-mail, etc.
Go to Storage > Recording Schedule.
Set the POS event's arming schedule.
Go to System > POS.
Click Event Linkage on the POS adding or editing interface.
Select the normal linkage actions: full screen monitoring, audio warning, or send e-mail.
Select one or more alarm output(s) to trigger.
Select one or more channels to record or become full-screen monitoring when a POS alarm is
triggered.
Click Apply to save the settings.
Network Video Recorder User Manual
Set Trigger Cameras of POS
179
Advertisement
Table of Contents
