Setting Alarm Linkage Actions; Configure Auto-Switch Full Screen Monitoring - HIKVISION NVST HNR Series User Manual

Setting Alarm Linkage Actions

Purpose
Alarm linkage actions will be activated when an alarm or exception occurs, including Event Hint
Display, Full Screen Monitoring, Audible Warning (buzzer), Notify Surveillance Center, Trigger
Alarm Output, and Send Email.

Configure Auto-Switch Full Screen Monitoring

When an alarm is triggered, the local monitor displays in full screen the video image from the
alarming channel configured for full screen monitoring. And when the alarm is triggered
simultaneously in several channels, you must configure the auto-switch dwell time.
Go to System > View > General.
Set the event output and dwell time.
 Event Output: Select the output to show the event video.
 Full Screen Monitoring Dwell Time: Set the time in seconds to show the alarm event screen. If
alarms are triggered simultaneously in several channels, their full-screen images will be
switched at an interval of 10 seconds (default dwell time).
Network Video Recorder User Manual
Combined Alarm
148